Glue Gun Flushing Agent

Home » Products » PUR Flushing Agents » Glue Gun Flushing Agent
Glue Gun Flushing Agent

In addition to adhesive products, we also provide cleaning agent for PUR hot melt adhesive equipment. Our JL-CA101 glue gun flushing agent is mainly used to clean the glue gun nozzle and hose after the use of polyurethane hot melt adhesive. Unlike ordinary cleaning solution, it is in the shape of light blue solids, with specific gravity of 0.9 g/cm3 and viscosity of 3000 to 4000 cP.s. In addition, it has higher working temperature, from 130 to 160 ℃, compared with cold cleaning agent. As the glue gun flushing agent is nontoxic, eco friendly, and can easily and thoroughly remove the hot melt adhesive without damaging equipment surface, it is increasingly used by customers worldwide.

Operation Conditions
1. First heat the glue gun flushing agent at 130 to 160 ℃ for about 30 minutes, and then continuously squeeze the residual PUR adhesive in the glue gun until the things being squeezed from the spray nozzle are just light blue flushing agents.
2. For reuse of the glue gun, when the things being squeezed from the spray nozzle are PUR adhesive, and then the normal adhesive application procedure can be started.

Generally, our glue gun flushing agents are packed in a 310 ml aluminum alloy tube, a bag with a capacity of 25 kg. To maintain their properties, please place our products in a dry, cool place, and avoid sun exposure. Since our PUR flushing agents are guaranteed for 12 months, customers can feel secure in purchasing them.

Our company is a specialized glue gun flushing agent manufacturer in China. Apart from PUR flushing agent, we also offer water based glue, pressure sensitive hot melt adhesive, PUR hot melt adhesive, and more.

Feedback Form
Other Products
    1. PU Construction GlueOur WL-8601 PU construction glue is a solvent free two-component structural adhesive based on polyurethane. It is easy to use and cures fast at room temperature. With 60 to 80 Shore D hardness range, the glue provides good impact resistance. In addition, the long open time of 30 to 90 minutes allows easy repositioning of substrates if required. Moreover, our product provides high bond strength ...
    1. Rubber Roller Flushing AgentAt 130 to 160 ℃, evenly scatter the flushing agent on the surface of rubber paint roller to melt the uncured PUR adhesive, and the melted adhesive in a liquid state will drop. Please repeated clean the rubber roller according to the amount of the residual glue.
      Place a container under the rubber roller to take drops in so as to avoid influence on equipment.