Rubber Roller Flushing Agent

Home » Products » PUR Flushing Agents » Rubber Roller Flushing Agent
Rubber Roller Flushing Agent

Due to the growing demands for adhesive products, there is an increasing need for adhesive cleaning agents. To fulfill this need, our company continually works to produce PUR flushing agent products, such as JL-CA102 rubber roller flushing agent.

Our rubber roller flushing agent is mainly used for rubber roller cleaning after use of the polyurethane hot melt adhesive. With a strong cleaning ability, the rubber roller cleaner can quickly and thoroughly remove the residual PUR adhesive, which helps improve process efficiency.

Appearance: slightly yellow to white crystalline powder
Melting point: about 64 ℃
Working temperature: 130-160 ℃
Warranty: 12 months
Packing: Our rubber roller flushing agent is packed in a bag with a capacity of 25 kg. It can also be packed as per customers' special requirements.
Storage: Our product should be stored in a dry, cool place, and direct sun exposure must be avoided.

Operation Conditions
1. At 130 to 160 ℃, evenly scatter the flushing agent on the surface of rubber paint roller to melt the uncured PUR adhesive, and the melted adhesive in a liquid state will drop. Please repeated clean the rubber roller according to the amount of the residual glue.
2. Place a container under the rubber roller to take drops in so as to avoid influence on equipment. After the use of flushing agent, please wipe the roller with ethyl acetate for better cleaning effect.

As an experienced rubber roller flushing agent manufacturer based in China, we also supply label hot melt adhesive, PU construction glue, furniture hot melt adhesive, and shoe PUR hot melt adhesive, among others.

Feedback Form
Other Products
    1. PU Construction GlueOur WL-8601 PU construction glue is a solvent free two-component structural adhesive based on polyurethane. It is easy to use and cures fast at room temperature. With 60 to 80 Shore D hardness range, the glue provides good impact resistance. In addition, the long open time of 30 to 90 minutes allows easy repositioning of substrates if required. Moreover, our product provides high bond strength ...
    1. Glue Gun Flushing AgentOur JL-CA101 glue gun flushing agent is mainly used to clean the glue gun nozzle and hose after the use of polyurethane hot melt adhesive. Unlike ordinary cleaning solution, it is in the shape of light blue solids, with specific gravity of 0.9 g/cm3 and viscosity of 3000 to 4000 cP.s. In addition, it has higher working temperature, from 130 to 160 ℃, compared with cold cleaning agent.